PLEASE READ CAREFULLY BEFORE USING YOUR WONDER.ONE TABLE, AND
THANK YOU FOR YOUR PURCHASE!
We put a lot of care into making sure your table arrives in perfect condition, but occasionally damage may occur during shipping. If you notice any defects to the box itself or any of the parts, please snap a quick photo and contact us right away at firstname.lastname@example.org.
We’ll be happy to resolve any issues that may come up, and photos of the damage go a long way in expediting the process.
Your table should arrive packaged snuggly and safely in two boxes.
Once you’ve inspected it for external damage, dive in! Avoid using blades or knives as you may damage the table or table covers.
Open the outer box and remove table covers and place aside to get to the inner box.
If you ordered a plexiglass top, it will arrive warped with brown craft paper for
safekeeping; keep an eye out for it,as it sometimes blends in.
Next, unpack table legs and light panel.
Inside the panel, there will be a bag with strings necessary for assembly, as well as a remote control, power adapter, and set of optional free accessories (such as silicone corners, melamine sponge, kinetic sand, and two molds).
Test the backlight by connecting it to the power adaptor and using the remote control.
You are now ready to put it all together!
Flip the table over and attach each leg into the pre-installed base. Screw the legs inside the base, and adjust the height of leveling foot by rotating in a clockwise direction. If the table is too short for your child, you can change the height using Phillps (+) screwdriver by relocating two screws on the side of the leg. You have three height points there (17”, 19” and 21”). Insert the included string through the holes of the table cover and make a knot on either side. This will help to remove or change the table cover.
Remove a protective plastic tab on the bottom of the remote control. Connect the light panel to the power adaptor and an outlet. Press the red button on the remote control.
Your table is assembled and ready for use!
Rub a piece of chalk into the full area of blackboard before you start drawing on Chalkboard. Then erase the entire surface.